Guide
NDIS manual handling training for support workers
NDIS manual handling training covering risks, mobility plans, equipment and reporting. Knowledge learning and workplace assessment. Register interest.
CareLearn's NDIS manual handling training covers the knowledge workers need to understand risks, individual mobility plans and equipment-related responsibilities. Managers can use the four modules to prepare for task-specific workplace instruction and assessment.
The short answer
No NDIS rule names a manual handling course. The duty comes from work health and safety (WHS) law. Employers must manage the risks of hazardous manual tasks, and moving people is one of them. Safe Work Australia's model Code of Practice for healthcare and social assistance is direct about it. No worker should lift or restrain a person, other than a small infant, by themselves.
So workers who help with transfers need training in safe handling, the participant's plan and the equipment they will use. Someone also needs to check they can do it.
This guide is general information for provider managers, team leaders and workers. It is not legal advice. Check with your state or territory WHS regulator.
Training for this topic: the Personal Care and Daily Living (ADL) bundle has 3 online modules with interactive scenarios, assessments and a certificate for each.
What the rules say
Work health and safety law
The model WHS laws have been implemented in every state and territory except Victoria, so Victorian providers should check their own state's law. Elsewhere they apply to NDIS providers like any other business.
Safe Work Australia says the model WHS Regulations have duties that apply to manual handling. A hazardous manual task is one where a person has to lift, lower, push, pull, carry, move, hold or restrain a person, animal or thing. Risk factors include repetitive or sustained force, sudden force and awkward postures.
The model Code of Practice: Hazardous manual tasks explains the duty. In summary:
- The business must manage the risk of musculoskeletal disorders. It eliminates the risk where it can, and otherwise minimises it using the hierarchy of control.
- Training in lifting techniques must not be the sole or primary way of controlling the risk.
- No worker should fully lift a person, other than a small infant, unaided.
In July 2025 Safe Work Australia published the Model Code of Practice for the healthcare and social assistance industry. Its examples include disability support services. It says:
- People handling is a hazardous manual task, and one of the most common causes of musculoskeletal disorders in the industry.
- You must consider the characteristics of the person being handled and, where appropriate, consult them, their family or other carers.
- You should provide transfer devices such as hoists and slides, and keep them maintained. You should provide enough workers and train them to use and maintain the equipment safely.
- Risks should be assessed before a person is handled, and again at regular intervals or when something changes, such as the person's medical condition.
- Information, training and instruction must be suitable for the work, its risks and the controls used. It must be easy for the worker to understand.
- Training records should be kept, and training reviewed when work processes or controls change, such as new equipment.
A model Code has legal effect only once it is approved in your state or territory. Approved codes are not law, but they are admissible in court. Check with your regulator which codes apply where you work.
The NDIS rules
The Practice Standards do not mention manual handling. But three sets of Core Module indicators apply. They are in the NDIS (Quality Indicators for NDIS Practice Standards) Guidelines 2018:
- Risk management: risks to participants and work health and safety risks are identified, analysed, prioritised and treated. The risk management system must cover work health and safety, and supports must be provided consistently with it.
- Safe environment: work is undertaken with each participant, in settings including their home, to ensure a safe support delivery environment.
- Human resource management: workers are competent in relation to their role.
The NDIS Code of Conduct also expects every worker to provide supports safely and competently, with care and skill.
Required, expected or good practice?
| What it means for manual handling | Where it comes from | |
|---|---|---|
| Legally required | Manage people handling risks, provide equipment and enough workers, and give suitable information, training and instruction | WHS law and the model Codes |
| What auditors expect | Risk assessments, current participant plans and training records for workers who do transfers | Practice Standards risk management and HR indicators |
| Good practice | A signed competency check for each participant's transfer and equipment | Your training policy |
See Mandatory vs recommended NDIS worker training for how this fits with other topics.
What good manual handling training covers
- Spotting risk. What makes a task hazardous, how to do a quick risk check before each transfer, and when to stop and get help.
- The participant's plan. Many participants have a mobility or manual handling plan, often written by a physiotherapist or occupational therapist. Workers should know where it is, what it says and that they must follow it.
- Consent and dignity. Explaining each step, asking first, and letting the person do as much of the movement as they can.
- Equipment. Hoists, slings, slide sheets, standing aids, wheelchairs and beds. That includes pre-use checks, the right sling size, how many workers are needed and what to do with faulty equipment.
- Not lifting. Using equipment and a second worker instead of lifting a person's weight.
- Falls. Reducing fall risk, and what to do after a fall. Check for injury, give first aid, call 000 if needed and follow the plan for getting up. Do not lift the person off the floor by yourself.
- Reporting. Hazards, broken equipment, near misses, and injuries to workers or participants. A participant's serious injury, such as a fracture from a fall during a transfer, can be a reportable incident. See the reportable incidents guide.
Online theory or practical competency?
| Online course | Practical competency check | |
|---|---|---|
| What it shows | The worker understands the risks, the rules and the principles | The worker can do this participant's transfer safely with this equipment |
| Who delivers it | A training provider | A trained team leader, physiotherapist or occupational therapist, as your policy says |
| When | At induction, then as a refresher | Before the worker does the transfer, and again when the plan or equipment changes |
| Evidence | A dated certificate | A signed, dated sign-off naming the participant and equipment |
Online training cannot teach the feel of a hoist or a slide sheet. Use it for the knowledge, then observe each worker on the job. Our guide to NDIS competency assessment explains how to run and record the observation.
Example: theory done, new equipment on the next shift
A worker has finished the online manual handling modules. Their next shift uses equipment they have not been assessed on. The certificate does not close that gap. Before the shift, the manager should arrange instruction on that equipment with the participant's mobility plan and a check by a suitable person, or roster a worker who has already been assessed. Record the outcome in the worker's file.
How often to retrain
Neither the NDIS rules nor the model Codes set a fixed interval for manual handling training. Set your own in your training policy, and retrain or recheck straight away when:
- new equipment arrives, or the participant's equipment changes
- the participant's condition or mobility changes, such as after a hospital stay
- there is a fall, an injury or a near miss
- a worker has not done that transfer for some time
- the participant's plan is updated.
See How often do NDIS workers need refresher training?
Common mistakes
- Teaching lifting technique as the answer. The model Code says technique training must not be the main control. Equipment, work design and enough workers come first.
- A certificate with no practical check. A course does not show that a worker can use this participant's hoist and sling.
- One worker on a two-person transfer. Rostering should match what the plan says.
- An out of date plan. Plans need review when the person's mobility changes.
- Faulty equipment left in use. Workers should know how to tag it out and report it.
- Not asking the participant. The person often knows best how they like to move.
- Forgetting worker injuries. A worker's strain or injury needs reporting under your WHS procedure too.
How CareLearn covers this
CareLearn is non-accredited online training. It is not affiliated with or endorsed by the NDIA or the NDIS Commission.
Module 17: Safe Movement and Transfers is the foundation for personal care workers: identifying hazardous manual tasks, following the transfer plan, checking hoists and slings before use, and taking faulty equipment out of service. Module 10: Duty of Care, Safe Work and Emergency Response in Core covers WHS duties and emergencies. The four-module Manual Handling course goes further:
- Manual Handling 1: Manual Handling, Risks and the Mobility Plan: what manual handling is and who it can injure, the no-lift or minimal-lift principle, and using each person's plan, equipment and required number of workers without improvising.
- Manual Handling 2: Safe Handling Principles, Techniques and Equipment: preparing for every transfer, protecting your own body, using slide sheets, hoists, standing aids and belts, communicating with the person, and stopping when a transfer does not match the plan.
- Manual Handling 3: Preventing and Responding to Falls and Emergencies: falls prevention within the plan, guiding a falling person down rather than catching them, checking for injury before any lift, when to call 000, and the breathing and CPR branch.
- Manual Handling 4: Scope, Plans, Dignity and Reporting: going ahead only when the plan, the right equipment, enough trained workers and your own training are in place, dignity, time pressure, and reporting hazards and incidents.
Each module has short lessons, a narrated lecture, interactive scenarios, a final assessment and a certificate. Online training cannot replace hands-on practice with each participant's own equipment, or a competency check by a suitable person.
Managers can see each worker's certificates, renewal dates and practical sign-offs together in the training register, and the NDIS standards map shows where each module fits.
Not affiliated with or endorsed by the NDIA or the NDIS Quality and Safeguards Commission. Non-accredited training aligned to the NDIS Code of Conduct and Practice Standards. CareLearn does not replace the NDIS Commission's Worker Orientation Module.