Guide
How often do NDIS workers need refresher training?
Which NDIS rules actually require refresher training, which set an interval, and how to write a refresher policy you can defend at audit.
The short answer
There is no general NDIS rule that worker training expires after 12 months. Only a few requirements use the word "refresher", and none of them sets an interval:
- Infection prevention and control, including the use of PPE, in the Core Module of the NDIS Practice Standards.
- Supported decision-making, in the SIL Practice Standards, for providers registered for supported independent living.
For the high intensity supports, the NDIS Commission's skills descriptors recommend that competency is reviewed every year, and sooner in some cases. That is guidance, but auditors use it.
For everything else, the refresher interval is yours to set. What an auditor wants to see is a written, reasonable schedule, based on risk, that you actually follow.
This guide sets out where each requirement comes from, how to build a refresher policy, and what a refresher date on a certificate does and does not mean. It is general information, not legal advice.
Training for this topic: the Core course has 12 online modules with interactive scenarios, assessments and a certificate for each.
Where the word "refresher" appears
Infection prevention and control
The Core Module quality indicators, in the NDIS (Quality Indicators for NDIS Practice Standards) Guidelines 2018, say:
- Each worker is trained, and has refresher training, in infection prevention and control standard precautions.
- Each worker who provides supports directly to participants is trained, and has refresher training, in the use of PPE.
- Under Human Resource Management, infection prevention and control training, including refresher training, is undertaken by all workers.
The Commission's consolidated Practice Standards and Quality Indicators uses the same wording. In that document, these are the only places "refresher" appears for worker training, and no interval is given.
SIL supported decision-making
The SIL Practice Standards, in force since 1 July 2026, say relevant workers are trained, and have refresher training, in supported decision-making. Again, no interval is set. The SIL standards also ask that workers are trained and assessed as competent in four named practices, which our SIL training requirements guide explains.
High intensity supports
The Commission's high intensity support skills descriptors cover complex bowel care, enteral feeding, dysphagia, ventilator support, tracheostomy, urinary catheters, subcutaneous injections and complex wound care. They recommend that:
- competency is reviewed annually to confirm current skills and knowledge
- a worker is reassessed if they have not delivered the support for more than three months, or when the participant's needs or support plan change.
The descriptors say this timeframe may vary with the support and the worker's experience. They are supplementary guidance, not rules, but auditors use them when assessing the high intensity indicators, so most providers follow them.
What does not say "refresher"
Many training indicators require training once and say nothing about repeating it. Examples are incident management, complaints, emergency and disaster plans, medication, mealtime management and the safe use of restrictive practices. The Worker Orientation Module has no expiry either.
That does not mean training lasts forever. The Human Resource Management indicators ask for a system to identify, plan, facilitate, record and evaluate training, and the NDIS Code of Conduct guidance expects workers to provide supports safely and competently, with care and skill, which includes keeping their knowledge and skills current. If a procedure changes, an incident shows a gap, or a worker has not done a task for a long time, an auditor will ask how you know the worker is still competent.
First aid and CPR are not NDIS requirements in themselves. Refresher expectations for them come from work health and safety guidance, such as Safe Work Australia's model Code of Practice: First aid in the workplace, and from the training provider that issues the certificate.
Summary table
| Topic | Refresher required? | Interval set? | Where it comes from |
|---|---|---|---|
| Infection prevention and control, including PPE | Yes | No | Core Module quality indicators |
| SIL supported decision-making | Yes, for SIL providers | No | SIL Practice Standards |
| High intensity supports | Yearly competency review recommended | Yes, in guidance: yearly, or after 3 months without giving the support | High intensity skills descriptors |
| Incident management and complaints | Not stated | No | Provider policy |
| Emergency and disaster plans | Not stated | No | Provider policy; drills are good practice |
| Medication and mealtime management | Not stated | No | Provider policy; refresh when a plan changes |
| Behaviour support and restrictive practices | Not stated | No | Provider policy; refresh when the plan changes |
| Worker Orientation Module | No | No | Completed once |
| First aid and CPR | Set outside the NDIS | Per WHS guidance and the certificate | Work health and safety |
How to set a defensible refresher policy
A defensible policy is one you can explain in a sentence for each topic and can show you follow. A simple way to build one:
- List your topics. Start with your training matrix: every topic, for every role. Our free training matrix template has a column for each common topic and works out due dates for you.
- Mark the ones the rules name. Infection prevention and control, and for SIL providers supported decision-making, must have a refresher. Set an interval for each.
- Rate the risk. For each other topic, ask what happens if a worker's knowledge fades. Medication errors, choking, missed reportable incidents and unauthorised restrictive practices are high risk. Topics like progress note style are lower risk.
- Choose an interval and a trigger. High risk topics often get a yearly refresher. Lower risk topics might be every two years. For participant-specific skills, use triggers: a change to the participant's plan, equipment or medication, a period without giving the support, or an incident.
- Write the reason down. Separate any external requirement from your own policy and from a training provider's certificate cycle. For example: "Infection control: yearly, and after any outbreak, because the indicators require refreshers and our workers support people at higher risk."
- Record it. Your training register should show the completion date and the next due date for each worker and topic.
- Follow up overdue workers. An auditor will look at whether refreshers happen on time, not just whether the policy exists.
- Review the policy. Once a year, and after any incident trend, check the intervals still make sense.
A common and reasonable pattern is yearly refreshers for the Code of Conduct, incident reporting, safeguarding, infection control and any high risk support, with participant-specific skills reassessed when needs change. That is good practice, not a rule, and you can choose differently if you can explain why.
Build a refresher schedule you can explain
For every scheduled refresher, record why that timing was chosen. Most intervals come from one of three places, and it helps to keep them apart:
| Where the interval comes from | Example | What to record |
|---|---|---|
| A law, rule or external requirement | The quality indicators require infection control refreshers but set no interval | The source, and the interval your policy sets to meet it |
| Your organisation's own policy | Yearly medication refreshers because your workers support people at higher risk | The reason, and who approved it |
| A training provider's certificate cycle | CareLearn certificates show a refresher date 12 months after completion | That this is the provider's product cycle, not a legal deadline |
This makes the schedule easier to review when a worker's duties, a participant's arrangements or a plan changes.
Review learning when the work changes
Alongside scheduled refresher dates, consider whether further instruction or assessment is needed when:
- a worker starts supporting a different participant or takes on new duties
- a participant's support arrangements change
- relevant plans, procedures or equipment change
- supervision identifies uncertainty or a gap in how the worker applies their training
- a worker returns to a task after a period away from it
- an incident review identifies a learning need.
These are suggested review prompts. They do not mean the same full course must be repeated after every change. Decide what needs attention: knowledge, a briefing on changed instructions, supervised practice or an appropriate assessment.
Example: a current certificate, but unfamiliar equipment
A refresher date six months away does not tell you whether a worker is ready to use equipment they have not used before, or to take on a new task. A current certificate shows that learning was completed; it does not show readiness for that equipment or task. Record the specific gap, arrange the preparation and document the outcome. Keep the certificate record and the task-specific assessment separate. A useful refresher record has the topic, the reason for the review, the action, the person responsible and the next review point.
What auditors look for
- A written refresher schedule, ideally inside your training policy or matrix.
- Evidence that the required refreshers happened: infection control for all workers, and supported decision-making for SIL workers.
- Yearly high intensity competency reviews, or a reason for a different interval.
- A register showing due dates and how overdue training is followed up.
- Refresher training after changes: new procedures, plan changes, incidents.
What CareLearn's 12-month refresher date means
Every CareLearn certificate shows a refresher date 12 months after completion. That date is our default, chosen because a yearly cycle suits most core topics. It is not an NDIS rule, and it does not mean the training is invalid after 12 months. If your policy sets a different interval for a topic, follow your policy and record it.
The refresher date is a prompt. It appears on the certificate and in the training register, so managers can see who is coming due. It does not replace triggers your policy sets, such as retraining after a participant's plan changes.
How CareLearn covers this
CareLearn is non-accredited online training and is not endorsed by the NDIS Commission. It covers the knowledge for the topics with a refresher requirement: Module 9: Infection Prevention and Control for every worker and Module 5: Supported Decision-Making and Dignity of Risk for SIL workers, both in Core. Module 25: High Intensity Support Foundations gives the background for high intensity supports, but the yearly competency review must be done by an appropriately qualified person with the participant. For leaders, Module 33: Workforce Competency, Training and Supervision covers setting up a training system and refresher schedule.
The training register shows refresher due dates for every worker and module, and supervisors record competency checks alongside them.
For CareLearn's record-keeping features, see training for providers. Essentials is open now on the For providers page; register interest for free trial and other package updates.
Not affiliated with or endorsed by the NDIA or the NDIS Quality and Safeguards Commission. Non-accredited training aligned to the NDIS Code of Conduct and Practice Standards. CareLearn does not replace the NDIS Commission's Worker Orientation Module.