Guide
Lone worker safety training for NDIS support workers: what the law expects and what to train
What work health and safety law says about support workers who work alone, the controls a provider needs, and what lone worker training should cover.
The short answer
Most support workers work alone at some point: a home visit, a community outing, a sleepover shift. Work health and safety law treats this as "remote or isolated work". The employer must manage the risks, and must give the worker a system of work that includes effective communication.
No rule names a lone worker course. But a check-in system only works if workers know how to use it, so training is part of meeting the duty. Good training covers planning a visit, check-ins, staying aware, leaving when it is unsafe, calling for help and reporting.
This guide is general information for provider managers, team leaders and support workers. It is not legal advice.
Training for this topic: the Specialist Supports bundle has 101 online modules with interactive scenarios, assessments and a certificate for each.
What the law says
Work health and safety law: required
The model WHS laws have been implemented in every state and territory except Victoria. They apply to NDIS providers like any other business.
Regulation 48 covers remote or isolated work. In the Commonwealth's Work Health and Safety Regulations 2011, which follow the model laws, it says a person conducting a business or undertaking:
- must manage risks to the health and safety of a worker associated with remote or isolated work
- must provide "a system of work that includes effective communication with the worker".
It defines remote or isolated work as work that is "isolated from the assistance of other persons because of location, time or the nature of the work". Assistance "includes rescue, medical assistance and the attendance of emergency service workers".
So a worker does not need to be in the outback to be isolated. A worker alone in a participant's home at night, with no colleague nearby, fits the definition. Check the wording of your own state or territory's regulation.
Safe Work Australia's page on remote and isolated work puts it simply: "Working alone or remotely can increase the health and safety risks of any job."
A participant's home is a workplace
Safe Work Australia's model Code of Practice for the healthcare and social assistance industry, from July 2025, says a workplace includes "a private home where someone is being cared for or supported by a worker".
The Code says that for work in other people's homes, "a pre-visit risk assessment should be conducted". It lists these as hazards:
- "Providing home-based care away from a supervisor and without support from other workers."
- "Performing work alone and not being given a means to reliably communicate with other workers when support is needed."
- "Driving long distances to work from different locations including clients' homes."
Its example controls include working in pairs and providing backup in high-risk situations. They also include providing, maintaining and testing equipment that workers use to seek help. For new workers, it suggests extra support and supervision, such as not having them work alone.
A model code has legal effect in a state or territory only once it is approved there. Check with your work health and safety regulator.
Victoria
Victoria has its own occupational health and safety law. WorkSafe Victoria publishes working alone guidance, including an information sheet on how to identify and control the risks.
NDIS Practice Standards
The Core Module does not name lone working. It does ask for a risk management system that covers work health and safety. It also asks that each worker is trained in the provider's emergency and disaster plans. An auditor may ask how your lone workers are covered by both.
| Item | Status |
|---|---|
| Managing the risks of remote or isolated work | Required by WHS law |
| A system of work with effective communication | Required by WHS law |
| A risk assessment before a worker visits a home | Expected by the model Code |
| A named lone worker course | Not named in any rule |
| Training workers to use your check-in and duress systems | Needed for the system to work |
| Working in pairs where there is a history of violence | Example control in the model Code |
| A debrief after an incident | Good practice |
What a provider needs in place
Training does not replace the system. Before you train anyone, check you have:
- A pre-visit risk assessment. Who lives there, pets, known behaviours, access, parking, lighting and phone coverage.
- A check-in system. Who knows where the worker is, when they are due to finish, and what happens if they do not check in.
- A way to call for help. A charged phone, and a duress device or app where the risk calls for it. Test them.
- A plan for black spots. Where there is no signal, arrange a landline, set call times or a second worker.
- An on-call contact. A person who answers, knows the procedure and can send help.
- Clear permission to leave. Workers must know they can step back from an unsafe visit without being blamed.
- Reporting. Incidents, near misses and hazards are recorded and acted on.
What good lone worker training covers
Check that a course covers:
- The risks of working alone. Aggression, medical emergencies, driving, animals, and hazards in homes.
- Dynamic risk assessment. Noticing warning signs on arrival and trusting them. A worker does not need proof that something is wrong.
- Preparing for a visit. Reading alerts, logging the visit and charging the phone and duress device.
- Check-ins and their limits. Updating the due time when running late, so a missed check-in still means something.
- Positioning. Parking for an easy exit, knowing the exits, and sitting with a clear path to the door.
- Leaving safely. When calming a person down is not working, the priority is to get out. Workers do not go back in for belongings.
- Raising the alarm. The duress procedure, the on-call number and when to call 000.
- Medical emergencies alone. Calling 000 on speaker and giving first aid within training.
- Reporting and near misses. A near miss is a free warning. It is reported so the hazard is fixed.
- Wellbeing. Debriefing after a frightening incident and using the supports on offer.
Training should use your own procedure. A worker who knows the theory but not your on-call number is not ready.
Common mistakes
- A policy with no system behind it. A check-in rule that nobody monitors gives no protection.
- A duress app that was never tested. Check coverage and battery life where the work happens.
- Sending new workers out alone too early. Pair them first.
- No updated risk assessment. A new housemate, a new dog or a change in behaviour changes the risk.
- Treating a near miss as nothing. Unreported near misses are how the next worker gets hurt.
- Expecting workers to manage danger alone. De-escalation has limits. Leaving and calling for help is the right call.
- Forgetting the participant. When a worker withdraws, someone must arrange safe replacement support.
How CareLearn covers this
CareLearn is non-accredited online training and is not endorsed by the NDIS Commission. The Specialist Supports course has four Lone Worker Safety modules, each about 20 minutes:
- Lone Working, Risk and Your Right to Be Safe
- Check-Ins, Awareness, Travel and Home Visits
- When Things Go Wrong, Duress and Emergencies
- Reporting, Community Hazards and Self-Care
Related modules include Module 12: Recognising Distress and De-escalation in Core and the Aggression Prevention series, starting with Your Right to Safety and Why Behaviour Happens. For medical emergencies there is Emergency First Aid 1: Being Prepared and the DRSABCD Framework. See also our de-escalation training guide.
Each module has short lessons, a narrated lecture, an interactive scenario, a final assessment and a certificate. Online training does not replace your own lone worker procedure, a risk assessment for each visit, or a first aid qualification. Walk each worker through your check-in and duress systems before they work alone.
Not affiliated with or endorsed by the NDIA or the NDIS Quality and Safeguards Commission. Non-accredited training aligned to the NDIS Code of Conduct and Practice Standards. CareLearn does not replace the NDIS Commission's Worker Orientation Module.