carelearn

Guide

Getting ready for an NDIS audit: the worker training records auditors ask for

What NDIS auditors look for in worker files and training records, how they sample workers, how long to keep records, and a pre-audit checklist.

Last reviewed 31 October 2026 against the NDIS Practice Standards and NDIS Commission guidance. General information, not legal advice.

A staff training session, with a trainer explaining a chart on a flipchart
Photo: Pexels

The short answer

At a certification audit, the auditor will pick some of your workers, read their files and talk to some of them. Reviewing a sample of worker records is mandatory. What they want to see is a clear trail for each worker: cleared to work, oriented, inducted, trained for the role, assessed as competent where it matters, supervised and kept up to date.

This guide covers which audit you face, what the indicators ask for, how workers are sampled and interviewed, the evidence usually checked, and how long to keep it. Our mandatory vs recommended training guide covers which courses are required. This one is about proving it.

It is general information, not legal advice. It is written for registered providers, because unregistered providers are not audited against the Practice Standards. The NDIS Code of Conduct still applies to them and their workers.

Training for this topic: the Leadership and Compliance course has 33 online modules with interactive scenarios, assessments and a certificate for each.

Verification or certification

The NDIS Commission's quality audits page sets out two audit types:

  • Verification is for lower risk, less complex supports. It is a desktop review of documents against the Verification Module.
  • Certification is for higher risk, more complex supports. It is assessed against the Core Module and any supplementary modules, and includes document review, site visits and interviews with participants and workers.

Which one you need depends on your registration groups. The Commission's registration groups page lists them. Assistance with daily personal activities (0107), high intensity daily personal activities (0104) and daily life tasks in a group or shared living arrangement (0115) are certification groups, for example. If you hold groups from both lists, you do a certification audit.

Certification providers usually also have a mid-term audit, starting within 18 months of the registration period beginning. Expect worker files to be sampled again.

What changed in 2025 and 2026

  • SIL. From 1 July 2026, supported independent living has its own class of support, 0138, which needs a certification audit against the Core Module and the new SIL Practice Standards. The Commission's July 2026 FAQs say providers already registered for SIL must show they meet the SIL standards at their next mid-term or renewal audit, whichever comes first.
  • Practice Standards review. The Commission has consulted on wider changes to the standards and how they are assessed, but has not announced next steps. For now the existing indicators apply.
  • Integrity and Safeguarding Act. The amending Act received Royal Assent on 8 April 2026. It strengthens the Commission's enforcement powers, but does not change the quality indicators auditors assess against.

What the indicators ask for

The Human Resource Management indicators in the NDIS (Quality Indicators for NDIS Practice Standards) Guidelines 2018 are the main source. For a certification audit, they expect:

  • The skills and knowledge for each position are identified and documented.
  • Records of pre-employment checks, qualifications and experience are kept.
  • Workers complete an orientation and induction process that includes the Worker Orientation Module.
  • A system is in place to identify, plan, facilitate, record and evaluate training, including mandatory training.
  • Supervision, support and resources are timely and suited to the supports delivered.
  • Worker performance is managed, developed and documented.
  • All workers involved in supports do infection prevention and control training, with refreshers.
  • Each worker's contact details and any secondary employment are recorded and kept current.

Other Core indicators add training evidence. All workers are trained in the incident management and complaints procedures, and each worker is trained in the emergency and disaster plans. The Incident Management Rules and Complaints Rules also require each system to include training requirements for workers.

The Verification Module is shorter: identity, right to work, pre-employment checks, qualifications or experience, the Worker Orientation Module, continuing professional development, and infection control and PPE training with refreshers. The Commission's verification documentation guide lists what to provide.

For SIL providers, the SIL module in the same Guidelines asks that workers are trained and assessed as competent in person-centred practice, trauma-informed practice, active support and supported decision-making, with refresher training in supported decision-making.

How auditors sample workers

The sampling rules are in the NDIS (Approved Quality Auditors Scheme) Guidelines 2018. They set a formula for the participant sample, but not a fixed number of workers. Instead, the worker sample must cover governance, management and service delivery roles, and all shifts where that applies. The auditor must not let you choose the sample, for workers or for participants.

In practice, any worker can be picked: a casual who started last month, a night worker, a contractor, a team leader or a board member. Auditors usually treat contractors as workers for the HR indicators, and the worker screening record rules cover contracted workers too. If a file would embarrass you, assume it will be chosen.

What auditors ask workers

The Commission's stage 2 audit page lists the kinds of questions workers may be asked. Worker records can be reviewed without consent, but auditors must get consent before an interview. Expect questions like:

  • How long have you worked here?
  • What happens if a participant wants to complain, or if there is an incident?
  • What training have you had, and did you complete the Worker Orientation Module?
  • Do you have a position description, performance reviews and regular supervision?
  • Did you have an induction, and what did it cover?

Auditors compare the answers with the file. A worker who says they have never had supervision when the file shows monthly sessions raises a question, and so does the reverse. Do not coach scripted answers. Make sure workers know where the procedures are and can describe them in their own words.

The evidence table

This table is auditor practice, not rule. No rule lists these exact documents, but they are the usual way to show the indicators are met.

Evidence itemWhat good looks likeCommon gap
Worker screening clearanceClearance number and expiry on your list of workers in risk assessed roles, checked before the first shiftExpiry not recorded, or the risk assessed roles list is out of date
Worker Orientation Module certificateA copy in every worker fileWorker says they did it at a previous job, but there is no copy
Induction recordDated, signed checklist showing which procedures were coveredA single "induction complete" tick with no detail
Role descriptionSkills and knowledge for the role, matching what the worker actually doesOne generic description used for every role
Training registerOne place showing each worker, topic, completion date and due dateRecords split across email, paper and an online system, with contractors missing
Competency assessmentObserved sign-off by a named, suitably skilled assessor for hands-on supportsAn online quiz certificate offered as proof of competence
Supervision recordsDated notes at the frequency your policy sets, with actions followed upPolicy says monthly, file shows two sessions in a year
Refresher recordsInfection control refreshers on time, overdue items followed upNo record of who is overdue or what was done about it
Participant-specific sign-offEach worker supporting the participant signed off on the current planPlan updated, but sign-offs refer to the old version
Performance reviewA dated review with development goalsLong-serving casuals never reviewed
Contact and secondary employment detailsRecorded and current for each workerNever asked, or years out of date

For high intensity supports, the Commission's high intensity support skills descriptors describe the competency evidence auditors expect. They are guidance rather than rules.

How long to keep records

Several rules set a retention period of seven years:

  • Worker screening records. The Commission's worker screening requirements say records about a worker are kept for seven years from when they were made. Your lists must show which workers were in risk assessed roles on any day in that period.
  • Incident records. Kept for seven years from when the record is made, under section 12 of the Incident Management Rules.
  • Complaint records. Kept for seven years from when the record is made, under section 10 of the Complaints Rules.

We could not find an NDIS rule that sets a retention period for training records as such. Keeping training, induction and competency records for seven years is good practice, because it matches the screening records and lets you answer questions about past incidents. Fair Work's seven-year rule covers employees' time and wages records, not training. A 2026 amendment to the NDIS Act, in force since 27 August 2026, adds a duty to keep certain claim records. Check which records it covers, and check state and territory laws too.

Common nonconformities

The Commission does not publish an official list. These are the gaps that most directly fail the indicators above:

  • No documented skills and knowledge for a position, or descriptions that do not match the job.
  • Worker Orientation Module certificates missing for some workers.
  • Training recorded, but no evaluation of whether it worked.
  • Supervision that happens informally but is never recorded.
  • Infection control refreshers overdue.
  • Workers giving a specific support without participant-specific training.
  • Workers unable to describe the incident or complaints process.
  • Screening lists that do not match the roster.

A corrective action plan is due within seven calendar days of written notice of a nonconformity. With only minor nonconformities and an acceptable plan, certification can still be recommended. A major nonconformity rules it out until closed or downgraded to minor.

A pre-audit checklist

  1. Pull your roster. List every worker who worked in the audit period, including contractors, casuals and night staff.
  2. Match it to the screening list. Every worker in a risk assessed role should have a current clearance recorded.
  3. Open ten files at random. Check each item in the table. Fix the gaps, then check ten more.
  4. Check the register. Every worker, every required topic, a completion date and a due date. Follow up anyone overdue and record it. If you don't have one, start with our free training matrix template.
  5. Check participant-specific training. For each mealtime plan, behaviour support plan, medication chart or high intensity support, confirm the current version is signed off by every worker who gives it.
  6. Check supervision. Compare records with what your policy says.
  7. Brief workers. Tell them an audit is coming, what auditors might ask, and where the procedures are kept.
  8. Prepare the opt-out process. Participants are included unless they opt out, and you must record any who do.
  9. Name one person who can find any document quickly on audit day.

How CareLearn covers this

CareLearn is non-accredited online training and is not endorsed by the NDIS Commission. It does not replace the Worker Orientation Module, worker screening, your own induction on your procedures, or participant-specific training and competency sign-off, which need someone to watch the worker do the task with that participant.

For leaders, Module 33: Workforce Competency, Training and Supervision covers training systems, supervision and competency, and Module 31: Governance, Risk, Quality and Information Management covers quality and information management. For workers, Module 7: Safeguarding, Incidents, Complaints and Advocacy covers the incident and complaints process, and Module 8: Support Plans, Progress Notes and Handover covers working from a current plan.

The training register shows completion and due dates for every worker and module, and supervisors record on-shift competency checks alongside them.

Register your interest to see the modules and the register.

Not affiliated with or endorsed by the NDIA or the NDIS Quality and Safeguards Commission. Non-accredited training aligned to the NDIS Code of Conduct and Practice Standards. CareLearn does not replace the NDIS Commission's Worker Orientation Module.

Try CareLearn with your team

Essentials is open now: buy seats on the For providers page. Free trials, Complete and Leadership open soon. Register your interest and we'll let you know.